ZACTA Technology Corpration　EMC　RF　Certification　Product Safety　Electrical Appliance & Materials （PSE）　Reliability＆Evaluation

Company profile

Company Name

ZACTA Technology Corporation

Address

1-5-9 Nakagawa-Chuo, Tsuzuki-ku, Yokohama, Kanagawa, 224-0003 Japan

Established

October 1978

Capital

142million-yen

Representative

CEO&Chairman　Yoshiharu Hatakeyama
President　Fumiyuki Aikawa

Number of staffs

73 （SEP 2010）

Main Bank

Bank of Tokyo-Mitsubishi UFJ,  Mizuho Bank, Ltd.

Main services

・Reliability & Evaluation business : Usability evaluation
・EMC business : EMC testing, EMC solution, Agent for application
・Product Safety business : Agent for safety test and various product approval tie-up with the cooperated laboratory.

Milestones

1978 October

Established "Bangard Corporation" for the purpose of medical-device sales

1985 August

Changed company name to "Zacta Engineering Corporation"

1996 July

"Zacta Engineering Corporation" merged with "Zacta Technology Corporation" and changed the company name to "Zacta Technology Corporation"

1996 August

Anechoic chamber and immunity test facility were introduced, and started immunity testing service.

1997 February

Started Usability service.

1998 June

Accredited by NIST/NVLAP, USA.

1999 August

Accredited by ETL Semko.

2002 May

Started EMC testing service in Techno-Park Takatsu in Kawasaki area.

2002 June

Started Reliability service.

2002 May

Started EMC testing service in Techno-Park Takatsu in Kawasaki area.

2003 July

Yonezawa Testing Center and TP Takatsu Anechoic Chamber were authorized by TUV Rheinland.

2005 April

Started Usability / Reliability service at Yokohama area.

2005 June

Acquired ISO9001:2000 Certification (Yonezawa Testing Center).

2006 September

Started Product safety service.

2006 October

Acquired the Miyako Ajenda21 Forum of environmental management system Certification (Yonezawa Testing Center).

2006 December

Introduced 3m & 10m Anechoic Chamber in Yonezawa Testing Center and started service.

2007 January

Started service of the domestic radio law.

2007 March

Accredited by BV, France.

2008 March

Started In-vehicle equipment　EMC　testing service.

2008 November

Accredited by VCA, Britain.

2009 January

Registered as “Registered Certification Body” under the Japanese Radio Law, Started services.

2009 March

Permitted by Ministry of Health,Labour and Welfare(MHLW), started detached service.

2010 September

Accreditated as an EMC laboratory by Taiwan BSMI..

Location

Main Office

1-5-9 Nakagawa-chuo, Tsuzuki-ku, Yokohama, Kanagawa, 224-0003 Japan
TEL 045-910-0880（From outside Japan(+81)45-910-0880)
FAX 045-910-0881(From outside Japan(+81)45-910-0881)

Yonezawa Testing Center

4149-7, 5-Chome, Hachimanpara, Yonezawa, Yamagata, 992-1128 Japan
TEL 0238-28-2880(From outside Japan(+81)238-28-2880）
FAX 0238-28-2888(From outside Japan(+81)238-28-2888)

Techno Park TAKATSU

2-6-1 Kitamikata, Takatsu-ku, Kawasaki, Kanagawa, 213-0005 Japan

Related Organizations

• VCCI（VCCI Council）  
• FCC（Federal　Communication Commision）
• NVLAP（National Voluntary Accrediation Program）  
• Intertek ETL SEMKO（Certification Body）
• TUV　Rheinland（Certification　Body)  
• ISO9001：2000  
• Kansai Electronic Industry Development Center  
• BV(Bureau Veritas.)
• VLAC（Voluntary　EMC Laboratory Accreditaion Center Inc.）

RF Certification Service

Radio services menu for JAPAN

Registered certification Body:011

ZACTA was registered as “Registered Certification Body” under the Japanese Radio Law by the Minister of Internal Affairs and Communications. With this registration, we started our services for testing and certification of radio equipment, such as wireless LAN or bluetooth.

certification of conformity with technical regulations

Testing for high frequency equipment,issue notification

• RFID,Carrier Interphone, PLC, microwave…

EMC

Testing Center Recognized Internationally

ZACTA technology is accredited by VLAC, NVLAP, and recognized by BV and Intertek ETL semko, and TUV Rheinland that is international recognized based on International Standard (ISO/IEC17025) for the quality.

Reliable EMC solution service

We have been providing EMC solution services to a wide variety of devices for 15 years, and our technical skill is highly regarded by our clients.

EMC Testing

EMC Solution & Consulting

On site EMC Testig

• For a large-scale industrial equipment, we can offer our on-site service that can be performed at your facility for both EMC testing and solutions.
• We also offer the enviromental measuring service for electromagnetic interferences.

Application agency service

• It is service that executes FCC Certification and the CB Certification as a proxy.

Collaboration Service

• We can be the point of contact on your behalf for coordinating the safety test, and to obtaining product approvals from CCC(China), BSMI (Taiwan) and other agencies.

Other Services

• Calibration Service
• Site Attenuation Measurement
• Field Uniformity Test
• Investigation of Standard
• Antenna pattern Test

Product Safety Service

Electrical Appliances and Materials Safety Law(JAPAN)

Testing for Electrical Appliances and Materials

Exceptions apply to Specified Electrical Appliances and Materials

Electrical Appliances and Materials Safety Law

• Ministerial Ordinance for Determining Technical Standards for Electrical Appliances
• Paragraph 1 Standards Attached Table 8
• Paragraph 2 Standards (J-IEC standard:J60950,J60335,J60065 / Noise Intensity:J55001,J55014,J55022)

Reliability&Evaluation

Verification Test

Reliability Test

• Temp./Humidity test
• Heat impact test
• Drop test
• Vibration test
• ESD test
• Short Circuit test

Facilities

YONEZAWA Testing Center
Facility	Spec.
Open-site (#2 & #3)	Shield room inside dimensions	12m L × 8m W × 6m H
	Maxi. power supply ability	6kVA
	Attenuation characteristic	±4dB
	Measurement distance	3m , 10m
	Turntable	Diameter 2.6m / Load capacity 1.0t
	Power supply for EUT	Single-phase AC100V - 240V/2kVA
Shield room 1	Shield room inside dimensions	7m L× 4m W × 3m H
	Maxi. power supply ability	Single / three-phase AC20V - 480V/50kVA
	Product entrance dimention	2m W × 2m H
Shield room 2	Shield room inside dimensions	4m L× 10m W × 2.4m H
	Power supply for EUT	6kVA
	Product entrance dimention	2m W × 2m H
10m Anechoic Chamber (EMI/EMS)	Shield room inside dimensions	21m L × 13.5m W × 8.5m H
	Power supply	Single / three-phase AC20V - 480V/50kVA
	Attenuation characteristic	±3dB
	Measurement distance	3m , 10m
	Turntable	Diameter 3.0m / Load capacity 1.0t
	Product entrance dimention	2m W × 2m H
3m Anechoic Chamber (EMI)	Shield room inside dimensions	9m L × 6m W × 6m H
	Power supply	Single / three-phase AC20V - 480V/50kVA
	Attenuation characteristic	±4dB
	Measurement distance	1m , 3m
	Turntable	Diameter 1.5m / Load capacity 0.5t
	Product entrance dimention	1.5m W × 2m H
Anechoic Chamber (EMI)	Shield room inside dimensions	7.2m L × 3.8m W × 3.8m H
	Maxi. power supply ability	2kVA
	Turntable	Diameter 1.2m / Load capacity 0.3t
	Product entrance dimention	2m W × 1.8m H
Anechoic Chamber (RS)	Shield room inside dimensions	7.0m L × 4.0m W × 3.0m H
	Power supply	Single / three-phase AC20V - 480V/50kVA
	Turntable	Diameter 1.5m / Load capacity 0.3t
	Product entrance dimention	1.5m W × 2.0m H
Techno park TAKATSU
Facility	Spec.
3m Anechoic Chamber	Shield room inside dimensions	8.5m L × 5.5m W × 5.25m H
	Power supply	Single-phase 2kVA
	Attenuation characteristic	±4dB
	Turntable	Diameter 2.0m / Load capacity 0.5t
	Product entrance dimention	1m W × 2m H
Shield room	Shield room inside dimensions	6.0m L × 4.0m W × 3.1m H
	Power supply	Single-phase 2kVA
	Product entrance dimention	1m W × 2m H

ZACTA Technology Corporation.

1-5-9 Nakagawa-Chuo, Tsuzuki-ku, Yokohama, Kanagawa, 224-0003 Japan
TEL 045-910-0880（From outside Japan(+81)45-910-0880)